Rebar Cutter Reinforcement Cutter

Introduction

Today, we will look at the reinforcement Rebar Cutter from the Car-tool company where to use it and how to use it.

This tool allows you to cut reinforcement up to 16 mm in diameter, as well as rods made of non-hardened steel. The reinforcement cutter Rebar Cutter has knives made of forged steel with increased hardness and a pump that develops pressure up to 10 tons.

Despite its power, the cutter is compact and weighs just under 4 kg. It is used both in construction and in everyday life. The Rebar Cutter is autonomous it does not require electricity. It works quietly, leaves no debris, and is relatively inexpensive, making it affordable for most craftsmen.

Technical Specifications of the Rebar Cutter

• Cutting Capacity: Up to 16 mm diameter (non-hardened steel).
• Maximum Pressure: 10 tons.
• Weight: Approx. 4 kg.
• Material: Forged high-strength steel.
• Operation: Manual hydraulic (no electricity required).
• Handles: Rubber-coated for grip and comfort.
• Portability: Compact size, comes with a branded yellow case.

---

Design and Case

The cutter comes in a branded yellow case. The handle is positioned near the center of gravity, making it easier to carry.

• Inside the case, the cutter occupies almost all the space.
• There is also a place for spare knives.
• The tool itself is well-painted, strongly built, and has rubber handles for easier use.
• Judging by its weight, the company didn’t skimp on steel quality.

---

Where to Use the Rebar Cutter

Construction Sites

This cutter is especially useful:

• Where there is no electricity to connect an angle grinder.
• Where using a grinder would create too much noise or debris.
• For quick cutting jobs without needing special clothing.

Everyday Life

The cutter can also be used at home. For example:

• Splitting chains (like a dog chain with 4.5 mm diameter).
• Cutting studs for formwork.
• Working with non-ferrous metals.

⚠️ Note: This Rebar Cutter should not be used for hardened steel. Some old reinforcement rods are hardened (they bend poorly but spring well). These should not be cut with this tool.

---

Knives and Replacement

The reinforcement cutter has replaceable knives:

• The upper knife can be unscrewed with a hex key.
• The lower knife is unscrewed after lifting slightly.

Replacement knives are available from the same company (link provided in the description).

---

Demonstration of Use

1. Cutting reinforcement:
   • Example: rebar with a diameter of slightly more than 14 mm.
   • Insert perpendicular to knives, close the valve, and pump.
   • Cut is made cleanly. The knives remain undamaged.
2. Cutting a chain:
   • Chain diameter: 4.5 mm.
   • The cutter splits the chain link easily without damaging chrome plating.
   • Pressure is released, and the removed link can be taken out with pliers.

Safety Tips

• Ensure reinforcement is properly aligned before cutting.
• Be cautious of small cut pieces they may fly at high speed.
• Keep others and fragile objects away while cutting.

---

Advantages of the Car-Tool Reinforcement Cutter

• Works without electricity.
• Compact and lightweight.
• Quiet operation with no debris.
• Affordable and reliable.
• Can replace a bolt cutter or stud cutter.

Maintenance Tips

• Keep the cutter clean and dry after each use.
• Lubricate the moving parts periodically.
• Inspect knives regularly and replace them when worn.
• Store in the provided case to prevent rust or damage.
• Do not overload beyond its 16 mm capacity.

Benefits of Using a Manual Hydraulic Rebar Cutter

• Autonomous: Works anywhere without a power source.
• Low Noise: Suitable for residential areas or enclosed spaces.
• Clean Work: No dust, sparks, or debris compared to grinders.
• Safe: Reduces the risk of fire hazards from sparks.
• Durable: Knives can be replaced, extending tool life.

Conclusion

I am very pleased with this reinforcement cutter. Its autonomy and clean working process are major advantages.

---

❓ Frequently Asked Questions (FAQ)

1. What is a reinforcement cutter used for?

A reinforcement cutter is used to cut steel reinforcement bars (rebar) and metal rods, especially where electricity is not available or when a clean, quiet cut is required.

2. Can this Rebar Cutter cut hardened steel?

No. This tool is designed for non-hardened steel, low-alloy rods, and non-ferrous metals. Hardened steel should not be cut with this tool.

3. How thick can the Car-tool reinforcement cutter cut?

It can cut reinforcement bars up to 16 mm in diameter.

4. Is it better than using an angle grinder?

Both have their uses. A rebar cutter is safer, quieter, and cleaner since it produces no sparks or dust. However, an angle grinder may be faster for bulk cutting.

5. Is the cutter portable?

Yes, it weighs less than 4 kg, comes with a compact branded case, and can be used anywhere without electricity.

6. Can the knives be replaced?

Yes. The cutter comes with replaceable knives that can be ordered from the manufacturer or supplier.

7. Where is this tool commonly used?

It is widely used in construction sites, DIY projects, workshops, and even at home for cutting chains, studs, and non-hardened rods.

---

ebar Cutter Guide: Types, Uses & Top Picks

Discover the best Rebar Cutter types, uses, brands, prices, and safety tips. A complete guide for construction pros to choose and maintain the right cutter.

Complete Guide to Slab Cutting: Meaning, Methods & Concrete Cutting Tips

This blog will give you a complete understanding of what is slab cutting?, its meaning, different techniques, equipment used, applications, and step-by-step concrete slab cutting procedure with professional insights.